Cadac R-Type - Manual (Page 103)

Osc & Communications 8271 11-5
Revision R2005-2 R-Type
4414149 5HPRWH#)LQH#OHYHO
Fine level control for the Remote input.
441414: 5HPRWH#0,&#URXWLQJ
These three buttons are used to route the Remote Input signal to LISTEN L and R
and the console’s TALKBACK bus.
441414; &DOO#5HPRWH
Press this button to activate a call light at a REMOTE location.
441414< &RPPV#0,&
Press this button to assign the LED meter to the Comms MIC signal source.
4414153 7DON#WR#%XV
Press this button to assign the LED meter to the Talk to bus signal source.
4414154 7DON#WR#/LQH
Press this button to assign the LED meter to the Talk to line signal source.
4414155 7DON#WR#5HPRWH
Press this button to assign the LED meter to the Talk to remote signal source.
4414156 7DON#IURP#5HPRWH
Press this button to assign the LED meter to the Talk from remote signal source.
4414157 &RPPV#0,&#7;9#3KDQWRP#SRZHU#21
Press this button to switch the 48V Phantom power for the T/B microphone plugged
into the XLR at the top of this module.
4414158 +30)LOWHU#,12287
Pressing this button will insert a highpass filter into the Comms Mic signal path.
4414159 3)/
Press this button to monitor the output of the T/B microphone amplifier.
441415: /('#PHWHU
This is an assignable LED meter showing the level of the signal source selected by
the buttons on the left of the module.