Cadac R-Type - Manual (Page 48)

6-8 Central Control Module 8281
R-Type Revision R2005-2
User Menu
MIDI Menu
# ⇒
Press the Enter button to access the MIDI menu, where the following functions can
be found:
9171814 0,',#3URJUDP#&KDQJH#ILOWHU
The MIDI Program Change filter can be selected on or off.
When the MIDI Program Change filter is “on”, only the first Program Change mes-
sage for a specific MIDI Channel is sent. Any identical PC messages to the same
channel are filtered out.
Alternatively, when the MIDI Program Change filter is “off”, all PC messages are
sent, whenever they appear in the data.
The reason for including this option, is that some types of MIDI controlled equipment
“close down” for a short time when a PC message is received, causing a brief loss of
the audio signal. It is therefore unnecessary and undesirable to repeat the same PC
number.
Press SYS to use the System menu. Using the up or down arrow keys until USER
SETUP appears on the CCM display. Select the sub-menu by pressing Enter
and the CCM display will respond with
USER SETUP .
Press the up or down arrow keys again until MIDI filter appears in the CCM display.
Then press Enter to select the option.
The CCM display will show:
“filter On or filter Off”
Press Enter to toggle between on and off. When the required option is set, press
[Esc] to return to one of the “root” displays.
9171815 0,',#6FHQH#UHFDOO
The Scene Recall feature can be controlled from an external device sending an
appropriate MIDI message to the R-Type CCM.
When the display is showing:
MIDI Setup
Scene recall
Press the Enter (
↵
) button and the display will change to show:
MIDI Recall
Disabled
Use the up or down arrow key to scroll through the possible Channel numbers that
can be enabled. Each channel will be displayed as:
MIDI Recall
on Chan 1
(the number scrolls through 1 to 16 then the display shows
‘Disabled’)
When the desired MIDI channel has been selected, pressing Esc will step back one
level in the menu system. External equipment may now send a “MIDI Program
Change” message on the selected channel number to recall Scene Memory 1 to
128.