Cadac R-Type - Manual (Page 58)

7-4 Mono Input Channel 8241
R-Type Revision R2005-2
:14144 6HQGV#4$2%#0#;$2%
Sends 1A/B - 8A/B can be switched between stereo and dual mono. In stereo, adjust
the level with the upper control and panning with the lower one. In dual mono, adjust
A level with the upper control and B level with the lower control.
Each pair has its own PRE/POST FADER and ON/OFF switch.
Switching between mono and stereo is performed and displayed in the CCM (Central
Control Module). See
6.4.1 Send Bus settings for information how to do this.
7.1.12 HF EQ Boost/Cut & Frequency
control
7.1.14 HMF EQ Boost/Cut & Frequency
control
7.1.16 LMF EQ Boost/Cut & Frequency
control
7.1.18 LF EQ Boost/Cut & Frequency
control
7.1.20 EQ PRE INS
7.1.21 EQ IN/OUT
7.1.23 HP-filter frequency control
7.1.26 PAN Centre level
7.1.27 PAN Control
7.1.30 Stereo PAN to groups 13-16
7.1.32 Matrix 13-16
7.1.33 Insert
7.1.34 MUTE
7.1.13 HF Q-control
7.1.15 HMF Q-control
7.1.17 LMF Q-control
7.1.19 LF Q-control
7.1.22 HP-filter IN/OUT
7.1.24 PAN Left-Centre-Right
7.1.25 PAN Centre
7.1.25 PAN Left-Right
7.1.28 Stereo
7.1.29 Stereo PAN to groups 9-12
7.1.31 PFL
0RQR#,QSXW#&KDQQHO#;574#0#IURQW#SDQHO