Cadac R-Type - Manual (Page 53)

Central Control Module 8281 6-13
Revision R2005-2 R-Type
9191: (GLWLQJ#6WHS#WLPH#+DQG#GHVWLQDWLRQ,
The Scene Recall system has a timer that may be programmed to start when you
recall a Scene. After the pre-set time has elapsed, the system will automatically
recall another Scene, which usually is the Next Scene. The system may, however, be
programmed to jump to any other scene. The time may be programmed for any or all
Scene Memories. If the display is showing:
EDIT MEM: 4
STEP : --.-
pressing EDIT will display:
RCL MEM: ---
AFTER : --.-
and a time value may be entered in the “after-space”. Normally Rcl MEM will show:
Nxt, but the cursor may be moved to this item using the up arrow button and a Scene
Memory number may be entered.
9191; (GLWLQJ#;0IDGH#WLPH#
X-fades are performed on motorized faders, details of which will be given when
motor faders are available.
9191< &RS\LQJ#6FHQH#0HPRULHV
See fig 6-4 for illustration. To copy a Scene Memory press CPY on the CCM. The
display shows COPY MEM ___ and the number of the source memory can be
entered. After the memory number has been entered the Enter-button illuminates
indicating it is active. Press Enter after which the display shows TO: ____. Enter
memory number using the numerical keypad. When the screen shows MEM number,
press Enter to copy the Scene Memory to that location. The display flashes, showing
copy operation OK and returns to the standard menu.
919143 %ORFN
The purpose of this function is to define a block or blocks of memory to be manipu-
lated. (more details to follow)
919144 ,QVHUW2'HOHWH
Press MEM and enter the desired Scene number. Press INS or DEL depending on
what operation you wish to perform.
Pressing INS inserts a blank memory space before the displayed memory number.
NOTE: If you have stored a memory in location 128, this memory will be erased
when the action above is performed.
To delete a memory, press MEM, enter the desired Scene number and press DEL.
The selected Scene will be removed from the list and all subsequent scenes will be
moved up one step. Location “128” will be made blank.
919145 '\QDPLF#DFWLRQV#LQ#6FHQH#0HPRULHV
It has been described above how motor faders may be programmed to perform a
timed X-fade. Once this (or any other dynamic action) has been started, it will run to
its conclusion. If you would like to terminate it early, press the STOP-button.
(more to be added).