Cadac R-Type - Manual (Page 106)

11-8 Osc & Communications 8271
R-Type Revision R2005-2
4415 2VF#)#&RPPXQLFDWLRQV#;5:4#0#UHDU#SDQHO
Inputs and Outputs are electronically bal-
anced and connected via 3-pin XLRs and
follow the wiring convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal (cold)
The 0.25” TRS jack connectors use the wir-
ing convention:
TIP = In-phase signal (hot)
RING = Out-of-phase signal (cold)
SLEEVE = Screen
IMPORTANT NOTE: Pin 1 on XLR con-
nectors and the ‘sleeve’ connections on
the jack sockets are connected to the
FRAME. This is to ensure that the con-
sole can comply with the Electric Com-
patibility (EMC) directive.
Connector for external Oscillator
Oscillator Output
Connector for Remote Call Lights
Connector for Talk-Back from Remote
Connector for Talk-Back to Remote
Connector for Talk-Back to Line