Cadac R-Type - Manual (Page 89)

Outputs and Matrix 8251 9-11
Revision R2005-2 R-Type
<1616 )DGHU
100 mm fader used to control the signal level.
<1617 %\SDVV
Press this button to stop the OUTPUT and MATRIX VCAs from being controlled by
DC Master faders.
<1618 /('#LQGLFDWRUV
LEDs 1-16 indicate either the DC Master or MG assignments.
LED marked DC indicates that LEDs 1-16 are displaying DC Master assignments.
LED MG indicates that LEDs 1-16 are displaying MUTE GROUP assignments,
LED WR when ON indicates that the Fader is READY to record dynamic movements.
This LED will flash in WRITE mode and when the fader is actually generating record-
able information.
<1619 6(7
This button is used with the assignment panel 8285 beneath the CCM to assign the
fader to DC Master or MUTE Groups.
<161: ,VRODWH
Press this button to isolate the entire fader module from the automation system.
<161; 2SHQ
The OPEN LED illuminates when this DC MASTER is open and not muted locally.