Comtech EF Data SLM-5650A Vipersat - Manual (Page 34)

Initial Configuration
2-10 Vipersat SLM-5650A User Guide
If this Hub unit is providing the TDM outbound, a route statement or
statements defining satellite communications with the Remote units must
be entered as well, as illustrated in the figure. One recommended option is
to enter a single super-route that will handle satellite communications with
all of the remote subnets.
Figure 2-6 Routes Table Page (Hub)
3. Click the Add Entry button.
4. Continue to add entries until all desired routes are entered.
5. Save the settings to flash by selecting Save from the Main Menu bar.
Dynamic Routing with OSPF
For networks that will utilize the Vipersat OSPF (Open Shortest Path First)
feature for dynamic routing, including SOTM roaming applications, additional
routing configuration is required. See the section “Dynamic Routing” on
page 3-40.