Comtech EF Data SLM-5650A Vipersat - Manual (Page 78)

Vipersat Configuration
3-38 Vipersat SLM-5650A User Guide
To maintain any parameter changes in flash memory, select Save from the Main
Menu bar.
Home State
An SLM-5650A’s Home State consists of those parameters which provide a
known RF configuration that the modem/router will return to, either as the result
of a command by the VMS, or as it comes back on line from a reset or a power
cycle. These Home State settings are typically selected so that the SLM-5650A
goes to a configuration which is optimum for its function in the network.
Select Home State from the Vipersat submenu to display the Home State
configuration page shown in figure 3-43.
Figure 3-43 Home State Configuration Page
Note that each of these Transmit and Receive parameters are the same as found
in the Transmit and Receive sections of the Modem Configuration page (refer
to the section “Set the Satellite Modem Configuration” on page 2-11 for
details). To modify any of these settings, enter the new value then click the
Submit button.