Comtech EF Data SLM-5650A Vipersat - Manual (Page 49)

Chapter 3 - Using the Web Server Interface (WSI) 3-9
Vipersat Configuration
Vipersat Configuration
Mouseover Vipersat in the Main Menu Bar, as shown in figure 3-9, to display
the submenu used for configuring the Vipersat features and functions for the
SLM-5650A.
The following sections describe each submenu in detail.
Vipersat
Selecting the first item in the submenu opens the Vipersat configuration page.
The display will vary depending upon whether the Working Mode is defined as
a Hub unit or a Remote unit. The example shown in figure 3-9 portrays a Viper-
sat Hub.
Figure 3-9 Vipersat Configuration Page (Hub)
An example of a Vipersat Remote is shown in figure 3-10. Much of the parame-
ters that are displayed for a Hub unit are also common for a Remote. However,
the Hub display includes the Hub Redundancy feature whereas the Remote
display includes the SOTM feature. These parameters are described below.