Metro Mobile Computing Workstations MPE-7800 Series Nickel Metal Hydride Power Supply User Manual
Page 24
24
Metro
TM
MPE-7800 Series NiMH Power Supply Operations Manual Supplement
InterMetro Industries Corporation
Desktop Status Window
The BatteryPro Desktop Status Window normally appears above the status tray icon. It
provides descriptive information of the charge status of the workstation power supply batteries,
including estimated times to complete charging or until fully discharged. The Status Window will
appear when BatteryPro is started if the “Always Display Battery Status” box is checked in the
Configuration tab of the BatteryPro dialog (see “Configuration” under “BatteryPro Configuration
and Status” below).
Displaying the Desktop Status Window
The Desktop Status Window is enabled for display in two ways:
1. Open the BatteryPro dialog, select the “Configuration” tab and left click on (to check) the
“Always Display Battery Status” box (see “Configuration” under “BatteryPro Configuration
and Status” below).
2. If the Desktop Status Window is not displayed, right click on BatteryPro status tray icon and
select and left click on “Show/Hide Status Window” to display it.
Notice: Using this method to display the Desktop Status Window will not change the
“Always Display Battery Status” setting in the Configuration.
If the Desktop Status Window is not displayed, right click on
BatteryPro status tray icon and select and left click on
“Show/Hide Status Window” to display it.
Moving the Desktop Status Window
You may move the Desktop Status Window by clicking on it and holding down the left mouse
button, and then dragging it to any part of the monitor display.
Hiding the Desktop Status Window
The Desktop Status Window is hidden (disabled from display) in two ways:
1. Open the BatteryPro dialog, select the “Configuration” tab and left click on (to uncheck) the
“Always Display Battery Status” box (see “Configuration” under “BatteryPro Configuration
and Status” below).
2. If the Desktop Status Window is displayed, right click on BatteryPro status tray icon and
select and left click on “Show/Hide Status Window” to hide it.
Notice: Using this method to hide the Desktop Status Window will not change the “Always
Display Battery Status” setting in the Configuration.
If the Desktop Status Window is displayed, right click on
BatteryPro status tray icon and select and left click on
“Show/Hide Status Window” to hide it.