Metro Mobile Computing Workstations MPE-7800 Series Nickel Metal Hydride Power Supply - Manual (Page 51)

Metro TM MPE-7800 Series NiMH Power Supply Operations Manual Supplement, Doc. No. L01-504 51
InterMetro Industries Corporation
Maintenance and Storage
Cleaning
Use Metro Cleaner (foaming aerosol available from InterMetro Customer
Service), or an equivalent mild hospital disinfectant, to clean the exposed
surfaces of the workstation on a regular basis. Metro Cleaner is
compatible with all of the components of the Metro
TM Series Mobile
Computing Workstation.
• Dampen a soft cloth with Metro Cleaner or equivalent cleaner
• Wipe surfaces until clean
• Do not spray Metro Cleaner into any openings (like air vents or fan
on power supply, etc.) of the Power Supply.
• Do not use Metro Cleaner for medical devices used for patient
contact (EKG contacts, etc.).
Power Supply Air Filter
Notice: The MPE-7800 Series Power Supply, Revision F4 and later, has no
external fan filter and is indicated by the label shown.
The vents around the outside of the power supply should be checked for
lint or dust buildup periodically and cleaned periodically by brushing off
the vents with a soft cloth or brush.
Notice: The following procedure for the Power Supply Air Filter applies only to and
is required for the MPE-7800 Series Power Supply that has an external
fan filter, Revision F3 or earlier, which may also be indicated by the label
shown.
Notice: In order to ensure proper cooling airflow, the Power Supply air filter for the
MPE-7800 Series NiMH Power Supply must be checked and cleaned or
replaced every 2 months. You will have one of two types of filters: a
flexible filter or an Easy-Clean metal screen filter. Perform the following
procedure to access and clean or replace the filter.