MovinCool Office Pro 63 Service Manual User Manual
Page 54
Advertising
Repair Section
54
(1) Removal of condenser fan and fan motor
1) Loosen the set screw using a hex key.
2) Remove six (6) nuts in the location shown.
3) Remove fan motor wire from three (3) ties.
4) Lift fan motor up then pull rear motor backward
and remove the fan motor. Centrifugal fan drops
into condenser fan housing.
I001933
Set Screw
I001934
Nuts (6)
I001935
Ties (3)
I001936
Advertising
This manual is related to the following products: