MovinCool Office Pro 63 Service Manual - Manual (Page 75)

Repair Section
75
10.4 Wiring Notice
• Secure the wires using clamps so that they do not come into contact with the edges of the
structure, etc. Secure the wires using clamps in the same position they were before removal.
10.5 Perform the Inspection
• Perform the inspection of cooling performance and check for abnormal noise or abnormal
vibration.
10.6 Caster Maintenance
• Lubricate bearings in caster as needed with standard bearing grease using the zerk fitting.
< NOTE >
Casters should roll and swivel freely. Check for dirt or dust build up. Remove dust or dirt build up.