MovinCool Office Pro 63 Service Manual - Manual (Page 7)

Operation Section
7
2. GENERAL DESCRIPTION
2.1 Spot Cooler
• In general, conventional air conditioners cool
the entire enclosed environment. They act as
“heat exchangers”, requiring an interior unit
(evaporator) to blow cool air into the interior
and an exterior unit (condenser) to exhaust
exchanged heat to the outdoors.
• Unlike conventional air conditioners, the
MovinCool Office Pro 63 is a spot cooler which
directs cool air to particular areas or objects.
MovinCool Office Pro 63 has the following features:
2.2 Compact Design
• The innovative design of MovinCool Office Pro
63 has resulted in one compact unit, replacing
the need for two separate units.
2.3 Easy Transportation and
Installation
• With the whole cooling system built into one
compact unit, MovinCool Office Pro 63
requires no piping and can be easily
transported and installed.
2.4 Energy Conservation
• MovinCool Office Pro 63 is economical
because it cools only the area or objects which
need to be cooled.
I000501
Condenser
(Outdoor Unit)
Evaporator
(Indoor Unit)
I001905