MovinCool Office Pro 63 Service Manual - Manual (Page 55)

Repair Section
55
5) Turn the fan motor around and place on mounting
bracket. Secure condenser fan motor with two (2)
nuts.
6) Remove six (6) screws from ring.
7) Loosen four (4) nuts that are securing the fan
casing. Lift the enclosure off its mounting. Slide
the condenser fan out through opening.
(2) Removal of evaporator fan and fan motor
1) Loosen the set screw using a hex key. Then
remove six (6) screws on the ring. Then remove
this ring and evaporator fan.
I001937
Nuts (2)
I001938
Screws (6)
I001939
Nuts (2)
Nuts (2)
I001940
Screws (6)
Set Screw
Evaporator
Fan
Ring