ONICON F-2600 - Manual (Page 34)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204 Page 34
2.5.2 Enclosure Adjustment (In-line Only)
Figure 15. Enclosure Viewing Adjustment
To avoid damage to the sensor wires, do not rotate the enclosure beyond 180° from the
original position. To adjust the enclosure:
1. Remove power to the flow meter.
2. Loosen the three set screws shown above. Rotate the display to the desired position
(maximum 180°).
3. Tighten the three set screws. Restore power to the meter.