OnLine Power Protector 3 - Manual (Page 21)

OnLine Power
2-11
2.6 OUTPUT LOADS
The Protector 3 delivers computer-grade, sine-wave power; the preferred power source for all electronic
equipment. There are, however, certain types of loads that exhibit an excessive inrush current when first
turned on or at other times during operation.
The capacity of the Protector 3 may need to be greater than what would be estimated based on the
nameplate requirements of loads previously discussed. Contact your OnLine Power dealer or the factory
directly if you have any questions about powering unusual loads from your Protector 3.
2.7 OPTIONS (See section 6 for details)
The following options are available with the Protector 3:
Normally ON output CB’s
Normally OFF output CB’s
Auxiliary Output Circuit Breaker
Various size, type, and quantity of output distribution breakers for emergency circuits
Input Circuit Breaker with High KAIC rating
High Temperature Alarm
Output Overload Alarm
Remote Meter Panel
AS400
LED Indicators
Extended Battery Run Times
GMS – Global Monitoring System