OnLine Power Protector 3 - Manual (Page 85)

OnLine Power
6-46
6.21.6 UPS alert mode:
When UPS in on alert mode by over temperature, the screen display will be as below , and continuously display
from )1), (2), and (3).
STATUS SCREEN SYSTEM MEASUREMENT SCREEN DIAGNOSTICS SCREEN
(1) (2) (3)
Push "LOG" Switch , then screen dispalys date/month/year with alarm names as shown below as a sample.
Push "LOG" switch again, then screen display as alert mode and continuously display from (1), (2),, and (3).
STATUS SCREEN SYSTEM MEASUREMENT SCREEN
DIAGNOSTICS
SCREEN
(1) (2) (3)
Re-start system after repairs. Screen display will start from (1) beginning of
start-up mode.
UPS ALERT @ 3KVA
INPUT OK @ CHRG ON
BATT OK @ DC OK
ON BYPASS @ OUT BAD OUTPUT: 000V @ 01923W
INPUT:123V @ 000 A
DCBUS: 173V @ NA A
BATT: 108 V @ +000A OVER TEMPERATURE
CALL FOR SERVICE
800- PWR-SRVC
800- 797-77827
2/24/08, 12 INP overtemp
2/24/08, 12 INP BAD
2/24/08, 12 INP BAD
2/24/08, 12 NP UV
UPS ALERT @ 3KVA
INPUT OK @ CHRG ON
BATT OK @ DC OK
ON BYPASS @ OUT BAD OUTPUT: 000V @ 00000W
INPUT:123V @ 000 A
DCBUS: 173V @ NA A
BATT: 108 V @ +000A OVER TEMPERATURE
CALL FOR SERVICE
800- PWR-SRVC
800- 797-77827