Online power, System status display ( sample - typ ) – OnLine Power Protector 3 User Manual
Page 66
OnLine Power
6-27
• Set a particular IP address
SYSTEM TIME – Set Netagent system time such as
• Set on interval for time syncluonization
• Choose the nearest time server to your location
• Set a difference time zone for different countries
• Set time normally
• Set to auto restart the system at a predetermined interval
• Restart normally the system
LANGUAGE – Set the language for web pages
(C) LOG INFORMATION:
Event Log -
A UPS event log with date/time and description.
SMS Log -
Short message signal log with date/time
Data log -
A UPS data log, record date/time, Input/output volt,freq (HZ), load as %, capacity (UPS
battery capacity) as %, and temperature in C.
Save Data Log- Save RS232 UPS'S voltage, frequency, load, capacity, temperature., ect as another file.
System Status Display ( Sample - TYP )
Sytem Information
Hardware Version
HDP520
UPS Last Self Test
--
Firmware Version
2.40.DP520
UPS Next Self Test
--
Serial Number
3925949185
UPS Critical Load
110%
System Name
Wave Rider UPS 1PH
UPS Critical Temperature
70.0 C
System Contact
Jose Zamora
UPS Critical Capacity
10%
Location
Show Room
System Time
2001/01/01 00:06:27
Uptime
00:06:28
Warning will be initiated 10 minute(s) before Scheduled Shutdown Event
Send Email for Daily Report
Network Status