HP DeskJet GT 5820 User Manual
Page 101
iii. Click or tap Administrative Tools, and then double-click or double-tap Services.
iv. Right-click or touch and hold Print Spooler, and then click Properties.
v.
On the General tab, next to Startup type, make sure that Automatic is selected.
vi. If the service is not already running, under Service status, click or tap Start, and then click or
tap OK.
Windows 7
i.
From the Windows Start menu, click Control Panel, System and Security, and then
Administrative Tools.
ii.
Double-click Services.
iii. Right-click the Print Spooler, and then click Properties.
iv. On the General tab, next to Startup type, make sure that Automatic is selected.
v.
If the service is not already running, under Service status, click Start, and then click OK.
Windows Vista
i.
From the Windows Start menu, click Control Panel, System and Maintenance,
Administrative Tools.
ii.
Double-click Services.
iii. Right-click the Print Spooler service, and then click Properties.
iv. On the General tab, next to Startup type, make sure that Automatic is selected.
v.
If the service is not already running, under Service status, click Start, and then click OK.
Windows XP
i.
From the Windows Start menu, right click My Computer.
ii.
Click Manage, and then click Services and Applications.
iii. Double-click Services, and then select Print Spooler.
iv. Right-click Print Spooler, and click Restart to restart the service.
b.
Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c.
If the wrong printer is set as the default printer, right-click the correct printer and select Set as
Default Printer.
d.
Try using your printer again.
6.
Restart the computer.
7.
Clear the print queue.
To clear the print queue
a.
Depending upon your operating system, do one of the following:
ENWW
Printing issues
95