HP DeskJet GT 5820 - Manual (Page 48)

Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using a wireless
connection.
To set up Web Services
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 75 .
2. Click the Web Services tab.
3. In the Web Services Settings section, click Setup , click Continue, and follow the on-screen instructions
to accept the terms of use.
4. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.
Repeat the instructions from step 1 to set up Web Services.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
42 Chapter 4 Use Web Services ENWW