RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 20)

Inspector D4000
™ Laser SP
Operator
’s Guide
RJS, Minneapolis, MN 002-5572
The first selection is Decodability Warning:
D/bility Warning
D
Select an ISO/ANSI Decodability grade to use in your
analysis.
(See Appendix C for an explanation of the grades)
A warning message will be produced for the selected
grade or any lower grades:
B C D F NONE
If NONE is selected, the Decodability grade will not be
used to trigger a warning message. However, the
Decodability grade will be calculated and available for
viewing.
The next selection is UPC/EAN tolerance:
UPC/EAN Tol.
116 - 150% Mag.
The magnifications are:
80 - 89 % Mag
90 - 115 % Mag
116 - 150 % Mag
151 - 200 % Mag
(See Appendix G for an explanation of magnifications)