RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 54)

Appendix F Operator
’s Guide
RJS, Minneapolis, MN 002-5572
When a Code 128 symbol is decoded with the Code
128 sub-specifications setting of Std 128 but the first
character after the Start character is a FNC1 then the
following error will be displayed:
Std 128
Format Warning
When a Code 128 symbol is decoded with the Code
128 sub-specifications setting of GS1-128 and the first
character after the Start character is not a FNC1 then
the following error will be displayed:
GS1-128
Format Warning
Data Content Testing
When Code 128 sub-specifications setting is GS1-128
and a GS1-128 bar code is inspected an additional
screen will be inserted into the Data Analysis screens:
(See Data Analysis, 8.0)
GS1-128
Acceptable
AI ( 01)
Example of a bad check digit in the GTIN:
GS1-128
Bad Mod. Check
AI ( 01)