RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 27)

Operator
’s Guide
Inspector D4000
™ Laser SP
002-5572 RJS, Minneapolis, MN 19
7.0 Pass/Fail Analysis Screen
After the symbol is scanned the Pass/Fail Analysis
Screen will be displayed.
An example of a Pass/Fail Analysis Screen for an
acceptable symbol is shown below:
*1234ABCD*
Code 3of9
D/bility % .64
D/bility Grade A
This screen shows:

The first line is the decoded data. (If more than 16
characters are present, those characters will wrap
to the next row of the display) Press
Select to
scroll through the data

The second line provides the Symbology type

The third line is the ISO/ANSI Decodability per-
centage grade

The fourth line is the ISO/ANSI Decodability letter
grade
Below is a sample of scans remaining in multiple scan
mode if the last scan has not been completed.
*1234ABCD*
02 Scans Remain.
If the symbology code is 128, only printable characters
will be displayed.
Note:
See Appendix E for descriptions of how these codes
are displayed