RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 67)

Operator
’s Guide
Appendix K
002-5572 RJS, Minneapolis, MN 59
Global Threshold (GT)
The global threshold is drawn through the middle of
a profile, to distinguish spaces above the line and
bars below. The reflectance value is determined by
dividing the symbol contrast (SC) by 2 and adding
the minimum reflectance, Rmin.
GT = Rmin + (SC/2)
GS-1
GS1 designs and implements global standards and
solutions to improve the efficiency and visibility of
supply and demand chains globally.
Guard Bar
The first and last bars of a bar code symbol usually
having the pattern 101. A guard bar generally fol-
lows the leading quiet zone and precedes the trail-
ing quiet zone. This term is used mostly for
UPC/EAN symbologies.
Infinite Pad Method
The method for measuring reflectance in which the
sample substrate being measured is backed with
enough thickness of the same type of substrate so
that doubling the number of sheets does not
change the measured value of reflectance.
Inspection Band
An area of the bar code symbol where measure-
ments shall be taken spanning from 10% to 90% of
the average bar height.