RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 21)

Operator
’s Guide
Inspector D4000
™ Laser SP
002-5572 RJS, Minneapolis, MN 13
The next selection allows you to select if the check
digit for UPC/EAN Random Weight bar codes should
be tested:
UPC/EAN Rnd. Wt.
Off
Note:
Select On to activate UPC/EAN random weight check
digit calculations. (See Appendix B, Table B-2
Notes)
The next selection is Decode 3 of 9 as:
Decode 3of9 as
Code 3of9
This selection is for choosing the Code 39
sub-specifications for analysis:
Code 3 of 9
3of9 w/43
AIAG B-1
AIAG B-3/4/5/10
LOGMARS
HIBC 3 of 9
The next selection is Decode I 2 of 5 as:
Decode I2of5 as
Std I2of5
This selection is for choosing the Code I 2 of 5
sub-specifications for analysis:
Std I2of5
ITF14 Case Code
I25 w/mod 10