RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 9)

Operator
’s Guide
Inspector D4000
™ Laser SP
002-5572 RJS, Minneapolis, MN 1
1.0 Preface
1.1 Proprietary Statement
The RJS Inspector D4000 Operator
’s Guide contains
proprietary information of RJS. It is intended solely for
the use of parties operating and maintaining the
equipment described herein. This information may not
be used, reproduced, or disclosed to any other parties
for any other purpose without the express written
permission of RJS.
1.2 Statement of FCC Compliance: USA
The equipment described in this manual has been
tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide a reasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with this operator
’s manual, may cause
harmful interference to radio communications. Operat-
ing this equipment in a residential area is likely to
cause harmful interference in which case the user will
be required to correct the problem at your own ex-
pense.
1.3 Statement of FCC Compliance: Canada
This Class A digital apparatus meets all requirements
of the Canadian interference-Causing Equipment
Regulations.
Cet appareil num
énque de la classe A respecte toutes
les exigences du R
èglement sur le maténel brouilleur
du Canada.
1.4 CE:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in