RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 28)

Inspector D4000
™ Laser SP
Operator
’s Guide
RJS, Minneapolis, MN 002-5572
Table 7-A (Code Identifier Descriptions for Pass/Fail
Analysis Screen)
Identifier Symbology Type
B-1 Code 39; B-1 sub-specification for AIAG
B345 Code 39; B3, 4, 5, or 10 sub-specification
for AIAG
LOG Code 39; LOGMARS sub-specification
HIBC Code 39; HIBC sub-specification
3 OF 9 Code 39; Traditional ISO/ANSI
sub-specification
39+C Code 39; with Mod 43
25+C Interleaved 2 of 5 with Mod 10
I25 Interleaved 2 of 5
CC Interleaved 2 of 5 ITF-14
sub-specification
GS1 GS1-128 Code 128
C128 Code 128
UPCA UPC version A
UA+2 UPC version A plus 2 digit addendum
UA+5 UPC version A plus 5 digit addendum
UPCE UPC version E
UE+2 UPC version E plus 2 digit addendum
UE+5 UPC version E plus 5 digit addendum
EAN8 EAN 8 character
E8+2 EAN 8 plus 2 digit addendum
E8+5 EAN 8 plus 5 digit addendum
EN13 EAN 13 character
13+2 EAN 13 plus 2 digit addendum
13+5 EAN 13 plus 5 digit addendum
Note:
The Identifiers listed above are displayed when the bar
code is acceptable. Some Identifiers will be different if
a warning is issued for the bar code.