Smart Avi SignagePro - Manual (Page 13)

3. Setting up the SignagePro Client 9
(c) 2010 SmartAVI
§ 3. Setting up the SignagePro Client
1. Connect the power supply cable to the SignagePro client and plug the cable into a grounded
power outlet.
2. Connect the mouse and keyboard cables to the corresponding ports.
3. Attach the VGA cable from the monitor or display to the VGA port on back of the client. If
you don't have VGA Cable attached, you won't see the SignagePro player in the Client
list of SignagePro Manager!
4. Connect the SignagePro client to a router using Cat5 cable. (If you will be using a wireless
router, please refer to your router’s manual for additional information).
5. Press the power button to start the SignagePro client.
6. Turn on the display connected to the client.
figure 3.0.1