Smart Avi SignagePro - Manual (Page 17)

4. Adding your company logo 13
(c) 2010 SmartAVI
§ 4. Adding your company logo
One of the major functions of digital signage is to get your message out and to increase your
brand recognition. One of the most important aspects of your brand is your logo. Combining
your logo with informative content is one of the best ways to do this. Each logo on the
SignagePro server consists of two files; an image file and a text file. The text file describes
the placement of the logo and adds a time and date.
To enable your logo please do the following:
1. If you haven’t done so already, create an image file of your company logo. SignagePro
support the following image formats; .png, .jpg and .gif. (figure 4.0.1)
figure 4.0.1
picture = sample_logo.gif
origin = bottom left
offset_x = 10
offset_y = 10
table 4.1
2. Create a text file using notepad (or comparable text editor) and insert the fields from tables
4.2 and 4.3. See table 4.1 for format examples.
Files on the USB flash drive
3. Save the file using the file name you used for your logo and .slogo as the extension.
Example= sample_logo.slogo
4. Copy the image file and the .slogo file onto your USB flash drive.
5. Insert the USB flash drive containing your logo image file and the .slogo file into the
SignagePro client, which is Player.
6. Run the configuration tool by pressing ALT+CTRL+2 and click on "Resources".