Smart Avi SignagePro - Manual (Page 75)

7. Screen Configuration 71
(c) 2010 SmartAVI
· Screen Modes – Configures the video mode for your display.
- Use the up/down keys to scroll for the desired resolution.
- Use the space bar to check the desired resolution.
- Select ‘Finish’ and hit ‘Enter’ to save your settings and return to the main menu of the
Configuration Panel.
- Select ‘Ok’ on the confirmation window and hit ‘Enter’
· Write Xorg.conf and quit
Saves all of your changes by writing your configuration settings to the Xorg Configuration file
and quits the configuration panel.
- Select ‘OK’ and hit ‘Enter’ to save your settings.
· Quit
- Quit the configuration panel without saving your settings.
· Once you save your setting you will be prompted to test your configuration. We recommend
that you test your settings to
- Type ‘Y’ for yes and hit ‘Enter’.
· If the tests are successful you will be taken to a screen with a
printout of your settings.
a. Use your mouse to place the cursor within the white area of your screen and ‘click’.
b. Type ‘Exit’ in the command line and press “Enter’ to exit the test results page.
c. Type ‘reboot’ in the command line to exit configuration and reboot the SignagePro client.