Smart Avi SignagePro - Manual (Page 24)

SmartAVI SignagePro Manual 20
(c) 2010 SmartAVI
§ 5. Wireless Configuration
Important: Before configuring Wireless network connection under the SignagePro client you
will need to setup your Wireless Router to have appropriate wireless settings.
We recommend to use WPA2-PSK with an AES configuration.
1. Turn Off the SignagePro client.
2. Insert the USB wireless adapter into any available USB slot on your SignagePro client.
3. Boot your SignagePro client with the USB wireless adapter connected.
figure 5.0.1
4. Once the unit is in the main screen (blue taskbar), go to CTRL+Alt+3. Hit the “refresh”
button and your wireless network should automatically show up in the list of networks. Go to
Properties of your Network. (figure 5.0.1)