Space Ray LTS Series Two Stage - Manual (Page 54)

Form #43155040
May 2013
-53-
24.2)
REMOVING MAIN BURNER AND GAS VALVE
4
3
5
5
LTS 40-75 Models
LTS 40-75 Models LTS 40-75 Models
4
3
6
6
1
2
1. Disconnect electrical supply and gas connection at the restrainer nipple.
2. Open the access panel and disconnect the wires from gas valve.
3.
Remove the burner clamp and screws.
4.
Remove the burner and gas valve assembly from the cabinet.
5. Unscrew the burner from the manifold.
6. Check the orifice. If the gas valve is to be replaced, the pipe joint compounds must be resistant to the
action of liquefied petroleum gases.