Airmar WeatherCaster™ Software - Manual (Page 16)

16
No Sensor Detected
If no sensor is found using the previously selected communication settings, the
Communications Interface Setup window will appear with the message, No
sensor detected with current communication settings. Then the No Sensor
Detected window will ask for a decision (see Figure 20).
Choose Abort, Retry, or Ignore.
• If Abort is selected, none of the previously modified setting will be saved, and
the Communications window will be re-displayed.
• If Retry is selected, another attempt to establish communication will be made.
• If Ignore is selected, the modified settings will be saved even though no
communication has been established. On start-up, the WeatherCaster screen
will appear.
Figure 20. Communications and No Sensor Detected windows