Airmar WeatherCaster™ Software - Manual (Page 19)

19
Setup Screen
When the WeatherCaster software opens, you will see a Setup screen with
gauges and dials (see Figure 24). The gauges display the data being sent from
the sensor in both analog and digital format. The dials along the left side are
settings that can be changed by the user. This screen is for setting up the display
only.
NOTE: Your screen may look different, depending upon the sensor(s) that is installed
Setting Dials
Wind Speed Setting Dial
This dial allows you to display wind speed in the
following units of measure:
• MPH—Miles Per Hour
• Knots—1 Knot = 1.15 Miles Per Hour
• KPH—Kilometers Per Hour
• MPS—Meters Per Second
To change the setting, click the text to the right
of the dial.
Figure 24. Setup Screen
SE 10
10 8
MPH
Knots
KPH
MPS