Airmar WeatherCaster™ Software - Manual (Page 56)

56
Alarms
WeatherCaster software can be used to set alarms for wind speed, water depth,
and barometric pressure. The user can turn alarms ON or OFF as well as define
the value that will cause an alarm to be displayed (see Figure 70).
• Wind Speed Alarm—The Wind Speed Alarm can be set for either apparent or
true wind. If the alarm is ON and the wind speed exceeds the alarm value set,
an alarm message will be displayed.
• Water Depth Alarm—If the Water Depth Alarm is ON and the water depth is
less than the alarm value set, an alarm message will be displayed.
• Barometric Pressure Alarm—If the Barometric Pressure Alarm is ON and the
barometric pressure is less than the alarm value set, an alarm message will be
displayed.
Click the Alarms tab in the Advanced Setup window (see Figure 29). Follow the
screen prompts. To accept each change, click Apply.
Figure 70. Alarms window