Figure 12, Figure – H3C Technologies H3C S12500 Series Switches User Manual
Page 28
Advertising
18
Figure 12 Locating the installation position of the slide rails
(1) Middle of the narrower metal area between holes
2.
Install the cage nuts on the rack posts.
a.
Insert the upper ear (callout 1 in
) of a cage nut into the corresponding installation
hole.
b.
Push the cage nut to lead its lower ear (callout 2 in
) into the same hole.
c.
Repeat steps a and b to complete installation of 24 cage nuts on the rack post. (Six cage nuts
for each rack post.
Figure 13 Installing the cage nuts
3.
Align the screw holes on the two sides of the right slide rail (marked with F/R) with the marked
holes on the right rack posts, and then fasten the screws.
Advertising