H3C Technologies H3C S12500 Series Switches - Manual (Page 70)

60
Displaying the power supply system information about your
switch
Use the display power-supply verbose command to display the following information about the power
supply system:
• Power management function status
• Power supply type, rated input voltage, and rated output power
• Number of redundant power modules
• Available, redundant, used, and remained power
• Operating status of power modules
• Power supply status of LPUs
# Display detailed information about the power supply system.
<Sysname> display power-supply verbose
Power info on chassis 0:
System power-supply policy: enable
System power-module redundant(configured): 1
System power usable: 4000 Watts
System power redundant(actual): 0 Watts
System power allocated: 3620 Watts
System power available: 380 Watts
System power used(current): 1070.00 Watts
System power monitoring unit 1:
Software version: 200
Type In/Out Rated-Vol(V) Existing Usable Redundant(actual)
---------- ------ ------------ -------- ------ -----------------
PSE9000-A AC/DC 220(default) 2 2 0
DC output voltage information:
Tray Value(V) Upper-Threshold(V) Lower-Threshold(V) Status
---- -------- ------------------ ------------------ -------
1 50.00 52.00 48.00 Normal
DC output current information:
Total current(A): 21.40
Branch Value(A)
------ --------
1/1 11.80
1/2 9.60
1/3 N/A
1/4 N/A
1/5 N/A
1/6 N/A
1/7 N/A