H3C Technologies H3C S12500 Series Switches User Manual
Page 88
78
1.
Rotate the power frame panel out with both hands to open the panel.
2.
Gently pull the clip at the bottom left corner of the power module to the left to open the power
module cover.
3.
Supporting the bottom of the power module with your left hand and holding the power module
cover with your right hand, gently pull the power module out of the power frame.
Figure 59 Removing a power module from the S12508
4.
Pull the clip at the bottom left corner of the new power module to the left to open the power module
cover.
5.
Slowly insert the power module into the power frame slot until it fits in completely.
6.
Close the power module cover and press the clip at the bottom left corner of the power module.
7.
Push in the power module cover and close the power frame panel.
Figure 60 Installing a power module in the S12508
4
2
1
3