H3C Technologies H3C S12500 Series Switches - Manual (Page 143)

133
Appendix D Lightning protection
Connecting the AC power supply to a power strip
with lightning protection
If part of the AC power line is routed outdoors, use a power strip with lightning protection to connect the
AC power cord of the switch to the AC power line to protect the switch from being damaged by lightning
strikes.
You can attach the power strip to the rack, workbench, or wall of equipment room.
CAUTION:
Make sure the PE terminal of the power socket has been securely grounded.
After you connect the AC power cord from the switch to a socket on the power strip, verify that the green
RUN LED on the strip is on and the red LED is off.
If the red LED is on, use a multimeter to check the polarity of the wires in the power socket for wrong
connections. If the zero wire (left) and the live wire (right) are correctly connected, check for missing
grounding connection.