Special ip addresses, Subnetting and masking, Configuration procedure – H3C Technologies H3C S12500-X Series Switches User Manual

Page 29

Advertising
background image

18

Class Address

range Remarks

D

224.0.0.0 to 239.255.255.255

Multicast addresses.

E

240.0.0.0 to 255.255.255.255

Reserved for future use, except for the broadcast
address 255.255.255.255.

Special IP addresses

The following IP addresses are for special use and cannot be used as host IP addresses:

IP address with an all-zero net ID—Identifies a host on the local network. For example, IP address
0.0.0.16 indicates the host with a host ID of 16 on the local network.

IP address with an all-zero host ID—Identifies a network.

IP address with an all-one host ID—Identifies a directed broadcast address. For example, a packet
with the destination address of 192.168.1.255 will be broadcast to all the hosts on the network

192.168.1.0.

Subnetting and masking

Subnetting divides a network into smaller networks called subnets by using some bits of the host ID to

create a subnet ID.
Masking identifies the boundary between the host ID and the combination of net ID and subnet ID.
Each subnet mask comprises 32 bits that correspond to the bits in an IP address. In a subnet mask,

consecutive ones represent the net ID and subnet ID, and consecutive zeros represent the host ID.
Before being subnetted, Class A, B, and C networks use these default masks (also called natural masks):

255.0.0.0, 255.255.0.0, and 255.255.255.0, respectively.

Figure 7 Subnetting a Class B network

Subnetting increases the number of addresses that cannot be assigned to hosts. Therefore, using subnets

means accommodating fewer hosts.
For example, a Class B network without subnetting can accommodate 1022 more hosts than the same

network subnetted into 512 subnets.

Without subnetting—65534 hosts (2

16

– 2). (The two deducted addresses are the broadcast

address, which has an all-one host ID, and the network address, which has an all-zero host ID.)

With subnetting—Using the first nine bits of the host-id for subnetting provides 512 (2

9

) subnets.

However, only seven bits remain available for the host ID. This allows 126 (2

7

– 2) hosts in each

subnet, a total of 64512 hosts (512 × 126).

Advertising
This manual is related to the following products: