Secpath f1000-e – H3C Technologies H3C SecPath F1000-E User Manual
Page 10
2
Figure 1 Front panel
(1) 10/100/1000 Base-T autosensing Ethernet copper
ports (GE0 to GE11)
(2) 10/100/1000 Base-T autosensing Ethernet
port LEDs (GE0 to GE11)
(3) Power module 2 LED (PWR2)
(4) Slot 2 LED (SLOT2)
(5) LINK/ACT LEDs (LINK/ACT)
(6) 1000Base-X SFP ports (SFP0 to SFP11)
(7) Console port (CONSOLE)
(8) USB port
(9) Power module 1 LED (PWR1)
(10) Slot 1 LED (SLOT1)
(11) System LED (SYS)
Figure 2 Rear panel
(1) Power module slot 1 (AC/DC)
(2) Power module slot 2 (AC/DC)
(3) Interface module slot 2
(4) Interface module slot 1
(5) Grounding screw
NOTE: A 2*10GE fiber interface module can be installed only in slot 1.
SecPath F1000-E
The F1000-E is designed for large- and medium-sized networks. It supports the following functions:
•
Traditional firewall functions
•
Virtual firewall, security zone, attack protection, URL filtering
•
Application Specific Packet Filter (ASPF), which can monitor connection processes and user
operations and provide dynamic packet filtering together with ACLs.
•
Multiple types of VPN services, such as IPsec VPN
•
RIP/OSPF/BGP routing
•
Power module redundancy backup (AC+AC or DC+DC)
•
Stateful failover (Active/Active and Active/Standby mode)