Configuring service management – H3C Technologies H3C SecPath F1000-E User Manual
Page 65
57
Figure 36 Basic configuration wizard—2/6 (basic information)
2.
Configure the system name and user password as described in
.
Table 8 Configuration items
Item Description
Sysname
Set the system name.
Modify Current User
Password
Specify whether to modify the login password of the current user.
To modify the password of the current user, set the new password and the confirm
password, and the two passwords must be identical.
IMPORTANT:
You can modify the password of a user authenticated by local authentication only and
cannot modify that of a user authenticated by remote authentication. If the name of a
user authenticated by local authentication and that of a user authenticated by remote
authentication are duplicated, your modification is only effective to the user
authenticated by local authentication.
New Password
Confirm Password
Configuring service management
1.
Click Next on the basic information configuration page to enter the service management page.