H3C Technologies H3C SecPath F1000-E - Manual (Page 9)

1
Overview
This documentation is applicable to the following firewall products:
• H3C SecPath F1000-S-AI firewall (hereinafter referred to as the F1000-S-AI)
• H3C SecPath F1000-A-EI firewall (hereinafter referred to as the F1000-A-EI)
• H3C SecPath F1000-E-SI firewall (hereinafter referred to as the F1000-E-SI)
• H3C SecPath F1000-E firewall (hereinafter referred to as the F1000-E)
• H3C SecPath F5000-A5 firewall (hereinafter referred to as the F5000-A5)
• H3C SecBlade firewall module
You can configure most of the firewall functions in the web interface and some functions at the command
line interface (CLI). Each function module specifies clearly whether the function is available in the web
interface or at the CLI.
SecPath F1000-S-AI/F1000-A-EI/F1000-E-SI
The F1000-S-AI/F1000-A-EI/F1000-E-SI, a leading firewall device of H3C, is designed for
medium-sized enterprises.
It supports the following features:
• Traditional firewall functions
• Virtual firewall, security zone, attack protection, URL filtering
• Application Specific Packet Filter (ASPF), which can monitor connection processes and user
operations and provide dynamic packet filtering together with ACLs.
• Multiple types of VPN services, such as IPsec VPN
• RIP/OSPF/BGP routing
• Stateful failover (Active/Active and Active/Standby mode)
• Inside-chassis temperature detection
• Management by its own web-based management system and IMC
The F1000-S-AI/F1000-A-EI/F1000-E-SI uses a multi-core processor and provides the following
interfaces:
• 12 combo interfaces, for fiber/copper port switching
• Two expansion slots, which support the following interface modules: 2GE copper interface module
(NSQ1GT2UA0) 4GE fiber interface module (NSQ1GP4U0), and 2*10GE fiber interface module
(NSQ1XS2U0).