H3C Technologies H3C Intelligent Management Center - Manual (Page 44)

35
2. View or modify the call builder configurations.
{
SIP User Name—SIP user name in the IP messaging system.
{
SIP Signaling IP Address—IP address of the local SIP in the IP messaging system.
{
SIP Signaling Port—Port number used to transmit SIP signals. The value range is 1 to 65535.
{
SIP Default Dialing Domain—SIP dialing domain used in the IP messaging system.
{
SIP Proxy1 IP Address—IP address of the first SIP proxy server.
{
SIP Proxy2 IP Address—IP address of the second SIP proxy server.
{
RTP IP Address—IP address that receives RTP packets.
{
RTP Start Port—RTP start port in the IP messaging system. The value is an integer in the range of
1 to 65535.
{
Default DTMF Payload Type—Default transmission protocol for DTMF packets. The default
transmission protocol for DTMF packets is RTP. The value is an integer in the range of 1 to 255.
{
SIP Registration Enabled—Whether or not the SIP registration function is enabled. Options are
Enabled and Disabled.
{
SIP Registration Interval (minute)—SIP registration interval, in minutes. The value is an integer in
the range of 1 to 65535.
3. Click OK.
Viewing voice performance monitoring information
In the Device Details page, you can view information about voice performance monitoring on the Voice
Performance Monitoring list.
Voice Performance Monitoring list contents
• Average of Measured Jitter
• Average of Measured Round-trip Delay
• Average of Measured Packet Loss
• Average of Measured of Computed MoS
• Number of Warnings
• Number of Alarms
To view information about voice performance monitoring:
• Monitor Index—Performance metric that the device is being monitored for.
• Monitored Value—Click the Monitored Value icon to view the value of the monitored index.
• Operation—Click the Start Monitor or Stop Monitor link to enable or disable the monitoring of the
monitoring index.
For more information about voice performance monitoring, see HP IMC Base Platform Administrator
Guide.