Vo-comm (if fitted), Vo-comm programming (if fitted) – RISCO Group GT 600 User Manual
Page 21
Page
20
GT 600 601
User Manual
Vo-Comm (if fitted)
Vo-Comm is a method of transmitting signals to a standard land-line or mobile
telephone giving information regarding the status of your security system. This may be
in addition to, or instead of central station communications. It should be noted that Vo-
Comm should not under any circumstances be used to ring the Emergency Services
directly. It will not be possible to program 999, 911 or 112 as the telephone numbers
that the Vo-Comm will dial.
Before Vo-Comm can work several options will need to be programmed. Please read
below for information.
Vo-Comm Programming (if fitted)
1)
With the display showing:-
2)
Enter a valid Master Level
Code.
Display will show:-
3)
Press NO 7 times.
Display will show:-
4)
Press YES.
Display will show:-
5)
Press NO until display will shows:-
6)
Press YES.
Display will show:-
Or for example
7)
To enter or change this
number Press NO.
Display will show:-
01 Jan 00: 00: 01
Do you want to . .
SET the System ?
Do you want to . .
Set-Up VoComm ?
VoComm
= Off
VoComm
> On
VoComm Tel. No.1
Is Un-Programmed
VoComm Tel. No.1
12345678910
VoComm Tel. No.1
--------------------------
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 20