RISCO Group GT 600 - Manual (Page 47)

Page 46
GT 600 601 User Manual
Keypad Alert
If programmed by your installation company, the two PA keys when pressed
together will act as alert keys. The exact function will depend on what they have been
programmed for. But, for example, if they are programmed as panic, pressing them will
activate the alarm when the system is set or unset.
Keypad Tamper
The keypad will monitor the number keys that are pressed without a valid User Code
being entered. More than 24 key presses will cause a keypad tamper. This will be
displayed as Keypad x Tamper and will require a valid User Code entry to stop the
sounders. If the system was Unset only the internal sounders will operate. If the
system was Set a full alarm will be generated.
System Tampers
The full security system is tampered, any attempt to remove covers from Keypads,
Control Panel, Keypads, Bell Box(es) or detectors will cause a tamper alarm. This also
applies to cut cables. If the system is Unset when the Tamper occurs the alarm will be
internal sounders only. If the system is Set a full alarm will be generated.
The alarm may be silenced by entering a valid User Code. The system may only be
Reset when the Tamper has been cleared, otherwise another Tamper alarm will be
generated.
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 46