RISCO Group GT 600 - Manual (Page 9)

Page 8
GT 600 601 User Manual
Unsetting The System
1) Enter the premises via the authorised entry route
(the broken entry tone will sound).
Proceed to the keypad.
2) At the keypad enter a valid code, the display
will show:-
3) The system is now unset.
Note: If an Area Code has been entered, only the area associated with that
code will be unset.
Note: If a Cleaner Code has been entered, only the cleaner area will be unset.
Part Setting The System
(using Master & Main type codes)
1) With the display showing:-
2) Enter a Master or Main type code, the
display will show for example:-
3) Press 1, 2 or 3 (for Part 1, 2 or 3), the
display will show for example:-
Note: If a Global code (Master or Main) has been used, all areas that are being
set will be Part 1 set.
Note: If an Area Main code has been used only Part 1 set for that associated
area will occur.
Note: Your installation company will have informed you what zones are being
removed (omitted) for the Part Set you are using. Refer to the System
Attributes section for what zones have been programmed as Part Set
zones.
01 JAN 18 : 58 : 01
01 JAN 18 : 58 : 01
Do you want to . .
Set the System ?
EXIT ! 1
Part 1
15
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 8