RISCO Group GT 600 - Manual (Page 43)

Page 42
GT 600 601 User Manual
Setting Using Group Master & Group Main Codes
Group Master & Group Main codes follow global Master & Main codes with respect to
the level functionality. The difference lies in the ability to have individual control of the
Areas that been allocated to the code.
1) With the display showing:-
2) Enter a Group Master or a Group Main Code.
Display will show:-
3) Press YES. Display will show:-
If you Press YES the system will start to Set all
the Areas that have been allocated to this Code.
Or
If you Press NO the display will show:-
(The Areas shown will differ depending on what
Areas have been allocated to your Code).
The Top line shows the Areas that are Set and
the Bottom line shows the Areas that are Off
(Unset). Use the keys 1 - 7 & 0 (
0 for cleaner Area) (4 - 7, 601 only)
to toggle the Areas between the Top & Bottom
line. When you have finished the display may
show for example:-
In this example Areas 1 & 3 will be Set but Area
2 will remain Off (Unset)
4) Press YES. The system will start to Set the
selected Areas.
5) Leave the premises via an authorised exit route.
01 JAN 18 : 58 : 01
Do you want to . .
SET the System ?
Set ALL Areas ?
Set
Off 1 2 3 Ok ?
Set 1 3
Off = 2 Ok ?
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 42