RISCO Group GT 600 - Manual (Page 41)

Page 40
GT 600 601 User Manual
10) This determines if using this user code to
set the system will trigger the Vo-Comm.
(For more details on Vo-Comm please refer to the
Vo-Comm section). Press NO until the setting you
require is displayed (YES or NO). Then press Yes.
Note: The Vo-Comm will need to be programmed in
order for this option to work (please refer to the
Vo-Comm section in this manual).
11) If you wish to accept the User Name shown press
YES and jump to step 16.
Or
If you wish to change the User Name shown press
NO, the display will show:-
12) You may now enter up to nine characters for
the user name using the layout shown below
for the allocation of characters.
13) Referring to the character map enter the required
character (pressing the 3 key will display 'G', pressing
it again will show 'H' and again will show 'I '), once
the correct character is displayed press YES and the
display will move on to the next position.
14) Continue entering characters (up to 9). If
you require a blank space press YES while
the '-' is displayed.
VoComm Trigger
= On Ok ?
User 02 Name
= User 02
User 1 Name
>
1 2 3
4 5 6
7 8 9
0 YES NO
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
0-9
600 601 PR600601_1_10user.qxd 25/08/2010 11:53 Page 40